Skip to content
Front three-quarter view of a black Audi RS5 with black rings, a black honeycomb grille and a BC plate, parked indoors at Brookswood Tint in Langley

Paint protection film · Audi RS5

Audi RS5 PPF in Langley, BC

At a glance

PPF on an Audi RS5 starts at $850 for a Partial Front in LLumar Platinum, with a Full Front from $1,550, the Track Package from $1,900 and the whole car from $4,000. An RS5's intakes, lips and flared arches take more template work than a plain bumper, so the quote can land above those figures. Audi widened the arches by 15 mm a side for 2020, and the 2026 RS5 offers a matte Plateau grey that calls for matte film.

Partial Front
From $850
Full Front
From $1,550
Track Package
From $1,900
Full Vehicle
From $4,000
2026 matte paint
Plateau grey, exclusive to the RS5
Warranty
10-year LLumar limited warranty

How much does PPF cost on an Audi RS5?

Four LLumar Platinum packages, from $850 to $4,000, each a starting price. An RS5’s bumper has more openings and edges than most, and that work can lift the final number.

Package From On an RS5 Days
Partial Front $850 Bumper, front section of the hood and fenders, headlights, mirrors 1
Full Front $1,550 The entire hood and both front fenders, bumper, headlights, mirrors 1–2
Track Package $1,900 Full Front plus the A-pillars, part of the roof and the rocker panels 1–2
Full Vehicle $4,000 All painted panels and the headlights 3–5

Light swirls in Platinum’s top coat level out with warmth from the sun or engine. LLumar puts a 10-year limited warranty on Platinum Gloss, and the defects the shop publishes as covered are yellowing, cracking, bubbling and peeling. Edges are tucked where the panel allows; if a bumper needs a relief cut, you’re shown where before it’s made.

Which parts of an RS5’s front end take the stones?

The bumper, by a distance. Audi’s 2020 RS5 exterior notes describe a wider, flatter Singleframe, outer air inlets cut as “independent, geometric bodies,” an air curtain that channels air through the bumper and along the wheels, and two spoiler lips under the bumper. All of it faces the road, and every opening is an edge the film has to finish around.

RS5 Front-end detail from Audi What it means for film
2020 to 2024 Coupe and Sportback Arches widened 15 mm a side over the previous car; side intakes with a new pentagonal cut Flares and intake edges take extra shaping
2026 Sedan and Avant About 4 cm wider than an A5 on each side, front and rear; air vents ahead of and behind the fenders The template for that year follows the new vents and flares

The wider the arches, the more painted surface sits in the spray from the front tires. That’s the case for adding the rocker panels on an RS5 that racks up highway kilometres, and the Track Package lists exactly what it adds.

Does matte paint or carbon on an RS5 change the film?

Both need a decision before the quote. For the 2026 RS5, Audi offers matte Plateau grey paint that it calls “exclusive to the model,” per its February 2026 release. Matte paint takes matte film: LLumar’s Platinum Matte is the shop’s choice there, and PPF on matte paint covers what to expect.

Carbon is the other variable. The 2020 Coupe could be ordered with a carbon fibre roof that shows its weave and saves about 4 kg, and the 2026 RS5’s Carbon Camouflage package puts forged carbon on the wing elements in the front bumper, the sill and rear inserts, and the mirror housings. Those parts can be filmed or left bare, and the quote should say which.

Booking RS5 paint protection in Langley

Send the year, the body, the colour and finish (gloss, matte or a pearl or crystal effect), and any carbon or styling-package parts. The paint is decontaminated and, where it needs it, corrected before the film goes down.

After pickup, give it a week before the first wash. From then on, hand wash or use a touchless bay, skip brush washes, and keep pressure nozzles away from the film’s edges. Ask for a figure through the RS5 PPF quote form or on 604 534 6433. The glass can be done in the same visit: Audi RS5 window tint prices each body, and the RS5 wrap page covers colour changes.

Drawing of a white 911 Turbo S with the nose, hood, front fenders, windshield pillars, front edge of the roof and side sills shaded green
Track Package from $1,900: the Full Front plus pillars, a strip of roof and the rockers
Satin black Porsche 911 GT3 RS on red wheels parked against the shop's block wall in Langley, covered in paint protection film
A satin-finish 911 GT3 RS in full PPF. Matte film keeps a flat finish flat, which is the point on a matte-painted RS5.

Asked at the counter

Questions about audi RS5 PPF

01Is matte PPF only for matte paint?

No. On gloss paint, LLumar Platinum Matte gives a satin look; on matte paint like Plateau grey, it keeps the flat finish Audi applied.

02Does a Sportback cost more to film than an RS5 Coupe?

Both start from the same four package prices. The quote then follows the panels on your car, so a longer body or extra panels can move it.

03When should PPF go on a new RS5?

Before its first long highway trip if you can, since chips start with the first gravel. The paint is decontaminated and checked before any film is laid.

How we checked this

Sources

  1. Audi, RS 5 Coupé and RS 5 Sportback (2020): exterior design
  2. Audi, The new Audi RS 5: high performance in a hybrid (February 19, 2026)
  3. LLumar, Platinum Matte paint protection film
  4. LLumar, Platinum Gloss paint protection film

Prices, timing and process come from Brookswood Tint Shop. Legal and product facts are quoted from the sources listed, checked on October 8, 2026. Laws and product lines change; call the shop if anything here doesn't match what you've been told.

Get a quote today.

Call or text 604.534.6433, email us, or send the form and we'll come back with a price and a date.