Skip to content
Black Dodge Charger widebody seen from the front corner, its long flared front fender and hood scoop catching the light, doors raised inside the Brookswood Tint bay in Langley

Vinyl wrap · Dodge Charger

Dodge Charger Wrap in Langley, BC

At a glance

Brookswood Tint wraps the Dodge Charger whole or panel by panel in cast vinyl from 3M and Avery Dennison, priced per car, with the 5-year vinyl term the shop publishes. Plan on 3 to 5 days for a full colour change, and anywhere from the same day to 2 days for a roof, hood, spoiler or stripe kit. Dodge sells several of those looks from the factory, from satin black hoods to the 2027 car's blade and strobe stripes, and vinyl can put them on a Charger that was built without them.

Price
Quoted per car
Vinyl
3M or Avery Dennison cast film
Full colour change
3 to 5 days
Roof, hood, spoiler or stripes
Same day to 2 days
2027 factory stripes
Blade, strobe, dual and Dual Fratzog

What does a Dodge Charger wrap cost?

It’s quoted per car. The price follows the size of the job, the film and finish, and how many parts have to come off for clean, tucked edges.

Job Typical time
Full colour change, every exterior panel 3 to 5 days
Single panels: roof, hood, mirror caps, spoiler, or stripes Same day to 2 days
Door jambs with a colour change Quoted with the full wrap

The Charger is a big canvas. Dodge’s 2026 Canadian press kit claims the new car has the widest body of any car in the industry, and the spec sheet gives 2,030 mm across without mirrors. Send the year, trim and the colour you’re after for a price.

Which factory Charger looks can vinyl recreate?

Most of the stripes and black panels Dodge sells as options. Ordering them from the factory means buying a new car; vinyl puts a similar look on the one you have, and it comes off later.

Factory look Where Dodge offers it
Bodyside “Charger” blade or strobe stripe in Gloss Red, Satin Black or Satin White Every 2027 SIXPACK trim, optional
Dual stripes in Gloss Black, Gloss White, Satin Black or Satin White, and Dual Fratzog stripes Every 2027 SIXPACK trim, optional
Satin Black hood, or a Satin Black hood patch 2027 SIXPACK, optional
Satin Black painted hood, roof, deck lid and spoiler 2023 Scat Pack 392, optional
Gunmetal stripe with Orange Tracer 2023 HEMI Orange Package

Sources: Dodge’s 2027 feature sheet, which the 2027 Canadian press kit calls new factory Mopar graphics, and the 2023 feature sheet. Vinyl comes in gloss, satin, matte, metallic and colour-shift, so the copy can match or go its own way.

Should you wrap the roof on a Charger?

On a 2015 to 2023 sedan, a black roof is one of the simplest changes vinyl makes, and the shop says a satin black roof on a gloss car is its most-requested single panel. On a 2026 Charger the question is different: the 2026 feature sheet gives every trim a sculpted, Gloss Black-painted steel roof, and Plus trims can swap it for a full-length glass roof.

Roofs and hoods face the sky, and vinyl ages faster there. 3M’s own warranty card covers 2080 film for 7 years on vertical surfaces but 2 years on horizontal ones in Canada, which its zone matrix places in Zone 2. The shop publishes a 5-year term on the vinyl. The roof wrap page covers single-panel work in more detail.

What does a widebody change for the wrap?

More surface and deeper curves. Dodge’s 2020 fact sheet says the Widebody’s flares widen the body by 8.8 cm, and that new side sills run between the front and rear fascias.

Each flare is a compound curve that the film has to be stretched and heated around, and the sills sit low where road spray hits. Expect a widebody quote to run above a standard-body car of the same year. If the wrap is mainly about protection on those lower panels, compare it with clear film on the Charger PPF page.

How do you book a Charger wrap in Langley?

Send photos, the year and trim, and the colour or film code you have in mind; the 3M 2080 and Avery SW900 comparison helps you choose between the two ranges. The shop quotes from those details and books the dates. Use the wrap quote form or call 604 534 6433. If you only want the bright trim gone, Charger chrome delete is a smaller job.

Mercedes-Benz GLS in Avery Dennison Matte Metallic Gunmetal vinyl, side profile on pavement beside an open timber shed under a grey sky
The shop's wrap of a GLS in Avery Matte Metallic Gunmetal. A Charger's flared fenders and long doors are wrapped the same way, one panel at a time.

Asked at the counter

Questions about dodge Charger wrap

01Can a wrap copy the 2027 Charger's blade stripe on an older car?

A stripe in a similar style and finish can be cut and applied to any Charger body. It won't be Dodge's own graphic, so bring a photo of the look you want and pick the nearest colour and finish from the 3M or Avery Dennison ranges.

02Does a widebody Charger cost more to wrap?

Usually, because the flares add surface and deeper curves that take more film and more time to lay. The quote comes from the car itself.

03Will vinyl come off a Charger cleanly later?

On sound factory paint, yes. Cast film is made to come off with heat, and removal gets harder the longer a wrap stays on past its rated life or if the paint underneath was resprayed or already failing.

Get a quote today.

Call or text 604.534.6433, email us, or send the form and we'll come back with a price and a date.