How is a Bronco wrap priced?
Per truck, from the coverage you choose. The shop publishes no wrap prices, because a full colour change on a four-door, a contrasting hard top and a set of bodyside graphics are three different amounts of vinyl and labour.
Both brands’ cast films come in gloss, satin, matte and specialty finishes, and whichever goes on your Bronco is backed, on the shop’s published terms, by its maker for 5 years. What moves a Bronco quote:
- two doors or four, and whether the doors and top get wrapped on or off the truck
- full colour change, roof or hood only, or graphics
- whether the black flares and grille stay black or change too
- the condition of the paint underneath
The vinyl wrap page describes the three levels of work the shop offers, from full colour changes to accents.
What makes a Bronco different to wrap?
It’s a kit of removable parts. Ford Canada sells the Bronco with doors that come off and a dual-top option on any model, so a wrap that works for this truck has to let each part come away cleanly.
- Doors. Each door is wrapped as its own piece, with the vinyl finished at the door’s edges rather than run across a gap.
- Trail sights. The front fenders carry bolt-on trail sights that double as grab handles; Ford’s SSM 51118 lists their fasteners as separate parts. Vinyl is laid around them, or under them where the hardware comes off.
- Flares. The fender flares are separate pieces too, which a 2026 recall, 26V-403, on 2022 to 2026 trucks makes plain. Leave them black for contrast or wrap them with the body.
- Top. A painted top wraps like a body panel. On 2021 and 2022 trucks, check first whether a moulded-in-colour top is part of recall 26V-299, since Ford may replace it.
The white Bronco in this page’s photo shows a partial approach, and its graphic is described on the Bronco graphic project page.
Which looks can Ford build from the factory, and where does vinyl add?
Ford already sells a lot of contrast. Its 2026 colour list for Canada runs from Oxford White, Wimbledon White and Desert Sand to Velocity Blue Metallic, Shadow Black and Avalanche Grey, with Marsh Grey, Shelter Green Metallic and a tinted-clearcoat Ruby Red Metallic among the extra-cost paints. On the Outer Banks you can pair body and roof colours, and the Heritage Edition comes with a contrasting Oxford White hard top and grille.
Vinyl covers what the order sheet doesn’t: a satin or matte finish, a colour Ford doesn’t sell this year, or a two-tone you can remove when you trade the truck. A satin black roof is one of the simplest changes, set out on roof wraps. If the aim is protection more than colour, compare PPF and vinyl.
How long will vinyl last on a Bronco’s hood and top?
Shorter on the flat panels than on the sides, going by 3M’s terms. 3M’s zone table files Canada under Zone 2. Read against its 2080 warranty card, that gives a Bronco’s doors and quarter panels, being vertical, 7 years, and its hood and top, being horizontal, 2. The shop’s own published figure is 5 years. Nobody has yet confirmed the Avery Dennison zone for BC, so raise the warranty on your particular film when you’re quoted.
That makes a wrapped hood or top the part to look over each spring. Rinse trail mud before it dries, wash by hand or touchless, and aim any pressure wand away from the vinyl’s edges.
How do you start a Bronco wrap in Langley?
Send the year, door count, trim, top type and colour, plus what you want changed: everything, the top, the hood or a graphic. Photos or a reference image help.
The shop looks at the paint, confirms which parts come off, and quotes the job. Ask through the Bronco wrap quote form. To black out lettering and badges instead, see Bronco chrome delete.
